Visit our newest sister site!
Hundreds of free aircraft flight manuals
Civilian • Historical • Military • Declassified • FREE!


TUCoPS :: Phreaking Cellular - Other Manufacturers :: uniden02.txt

Uniden CP900, 1000, 1050, 1100, 1200, 1500, 1900, 2000, 3000, President 4000 GTS and 4500 GTS Programming




           UNIDEN CP-900, 1000, 1050, 1100, 1200, 1500, 1900, 2000,
                    3000, PRESIDENT 4000 GTS and 4500 GTS


                NAM Type:  EEPROM
            Manufacturer:  UNIDEN
              Programmer:  Serivce Handset or Programmer Handset
          ESN Prefix DEC:  172
                     HEX:  AC
 ESN, S/N Match Required:  Yes
    Handset Programmable:  Service Handset or Programmer Handset
      Number of Channels:  666 (900, 1000) others 832

    Programming Sequence:  Connect antenna or load
                           Power Off
                           Disconnect standard handset
                           Connect blue or white service handset
  White Handset (CP-010):  Turn Power Switch On while holding *
                            and # continue holding * and # for two seconds
    Blue Handset(CP-210):  Turn Power Switch On
                           Press SELECT + 2 + SEND
           Both Handsets:  Enter step number, then data for individual
                            parameter
                           Press STO to enter data for each step
                           Increment by pressing next step number
  To review parameters press:  RCL + Step number + STO (to exit)
                           If phone has dual NAM(ie 1050, 1500 & 2000),
                           Press 9 + 5 + SEND (to toggle between NAMs)
                           Press SEND to write NAM information
                           PASS will appear in display if data is valid

Step                  # of Digits
0              System ID:  5    XXXXX + STO
1              Local Use:  1    (0 or 1) + STO
2                MIN Opt:  1    (0 or 1) + STO
3          Mobile Number:  10   XXX-XXX-XXXX + STO
4    Initial Paging Chan:  3    (333 or 334) + STO
5        Access Overload:  2    XX + STO
6       Preferred System:  1    [0 (B) or 1 (A)] + STO
7               Group ID:  2    XX + STO
8         Local Code (1):  4    XXXX + STO
9       F5 DTMF Duration:  2    0-100ms or 1-Continous

Press STO to increment to F6 or A

All models Except 1500, 1900 and 4500 GTS

      F6 Automatic Power:  1    0=3 hrs or 1=6 hrs

A  Handset/Handsfree 1
 0(phone auto transfers from switching H/S to H/F) OR
 1(call ends when H/S is placed in cradle unless user presses
   RCL + 6 + 6)

Press STO after entering F6 or A data
Press SEND to exit program mode

              Horn Alert:  RCL + 9 + 9 + Turn Ignition Off

         New Unlock Code:  NAM

           System Select:  X + STO + 8 + 8
                                 X=1  A only
                                 X=2  B only
                                 X=3  Home
                                 X=4  Standard AB or BA
                                 X=5  Inverted BA or AB



TUCoPS is optimized to look best in Firefox® on a widescreen monitor (1440x900 or better).
Site design & layout copyright © 1986-2014 AOH