Visit our newest sister site!
Hundreds of free aircraft flight manuals
Civilian • Historical • Military • Declassified • FREE!


TUCoPS :: Phreaking Cellular - Other Manufacturers :: radio~10.txt

Radio Shack CT-352 NAM Programming





STEP 1 to Enter Progam Mode:

Type:   *3001#12345<STO>00    Phone Responds:  STORE NOT DONE

STEP 2 to Program the User's Phone Number:

Press: <RCL> 0 2   Phone Responds:  1111111111 (or previously programmed #)
Press and HOLD:  <CLR> until display is empty

Type: cellular phone number and <STO> 02  Phone Responds: REPLACE CONTENTS?

For example:   8173905555 <STO> 02

Press:  <STO>      Phone Responds:   STORED

STEP 3 to Enter Carrier Parameters:

Type:  <RCL> 0 3   Phone Responds:  38*1*1*334*15*15 (or previously 
                                                     programmed parameters)
Press and HOLD:  <CLR> until display is empty

Type: cellular phone paramemters and <STO> 03, on the CT-352,
      add the Long Distance and International Code.

For the CT-350/351: 00038*1*1*334*05*10 <STO> 03
                      │        │   │  │
Home or System ───────┘  333 for A │  └───-Group ID
                         334 for B │
                         Channel   │
                                   └─-0 and Last
                                      Digit of Phone #

For the CT-352:  00038*1*1*334*05*10#0111*1 <STO> 03
                   │        │   │  │    │  
Home or System ────┘  333 for A │  │    └───────Internat Code
                      334 for B │  └────-Group ID
                      Channel   │
                                └─-0 and Last
                                   Digit of Phone #

Phone Responds:   REPLACE CONTENTS?              Press:  <STO>

STEP 4 to Enter Lock/Security Code Parameters

Type:  <RCL>01              Phone May Respond:  911#*911#0*1234
Press and HOLD:  <CLR> until display is empty

Type:  911#*911#0*

Type (for the CT-350):      4 digit lock code       (1234 is the default)
Type (for the CT-351/352):  5 digit security code   (12345 is the default)

Note: The 0 in this section denotes "ENGLISH" language selection. Replace 
      with a "1" for Spanish, a "2" for French.

Type:  <STO>01      Phone Responds:  REPLACE CONTENTS?     Press:  <STO>

You are DONE.  The phone must be turned off and then on again before
it will recognize the new parameters.  Always wait at least two hours
after receiving the cellular phone number from the carrier before testing
the phone.

Settings List:

<MENU> 0    Lock Phone
<MENU> 1    Change Carrier Priority (A/B)
<MENU> 2    Display Last # Dialed
<MENU> 3    Call Timers
<MENU> 4    Turn ON/OFF Display Light
<MENU> 5    Enable/Disable Key Tone
<MENU> 6    Ring Volume
<MENU> 7    Primary/Secondary NAM select
<MENU> 8    Send DTMF Tones


(PN/jej-04/07/95)


TUCoPS is optimized to look best in Firefox® on a widescreen monitor (1440x900 or better).
Site design & layout copyright © 1986-2014 AOH