Visit our newest sister site!
Hundreds of free aircraft flight manuals
Civilian • Historical • Military • Declassified • FREE!


TUCoPS :: Phreaking Cellular - Other Manufacturers :: oki07.txt

Oki 810, 890, 891, 910 Programming




OKI 810, 890, 891, 910

NOTES:  These units are single NAM.
        The ESN prefix is 129 decimal & 81 hex.
        OKI: 1-800-554-3112


NAM programing:

1.  Turn power on.

2.  Within 30 seconds press RCL & FUNC keys together and release, enter
    * 1 2 3 4 5 6 7 8 #, (or enter dealer password if one has been used).

NOTE: If you used the dealer password successfully in step 2 go straight
      to step 5 below.

3.  The phone will display "ENTER NEW PW AND STO" you may enter a ten digit
    password at this stage to be used in future re-programings.  Press
    STO to retain default password or enter a ten digit password and press STO.

4.  The phone will display "RE-ENTER PW AND STO" re-enter the password, press
    STO to confirm.  Again, press STO to retain default password.

5.  The phone will then display the Software Version followed by the
    ESN in hex

6.  The following "re-set" options can be bypassed by pressing volume down
    to scroll.  Each step is followed two seconds later by "Press * to Clear",
    you can either press * or press CLR to bypass.

Step#    Display             Action

01       SPd diAL            Wait 2 seconds.
         Press 0 to Reset    Press 0 to initialize speed dial memories.
02       dEF dAtA            Wait 2 seconds.
         Press 0 to Reset    Press 0 to initialize unit.


1.  The STO key stores each entry.

2.  The Volume UP key scrolls down through the steps.

3.  The Volume DOWN key scrolls UP through the steps.

4.  At any time press CLR to exit program mode.


PROGRAMMING DATA:

STEP#    #OF DIGITS/RANGE    DISPLAY        DESCRIPTION

01       10 DIGITS           Phon            MIN (AREA CODE & PHONE NUMBER)
02       5 DIGITS            Sid             SYSTEM ID
03       4 DIGITS            IPCH            IPCH AUTOMATICALLY SET
04       2 DIGITS            ACCOLC          ACCESS OVERLOAD
05       2 DIGITS            gid             GROUP ID (10 FOR USA)
06       3 OR 4 DIGITS       ULOC            LOCK CODE
07       4 DIGITS            SCM             STATION CLASS MARK
08       4 DIGITS/0 OR 1     OPtn            OPTION BITS:
                                             1 enables, from left to right:
                                             MIN Mark
                                             Local Use
                                             Audio Mute (910: Hands Free)
                                             Horn Alert (910: Not Used)
9      6 DIGITS              SC              SECURITY CODE (DEFAULT IS LAST
                                             SIX DIGITS OF ESN)
10     911                   HELP            EMERGENCY NUMBER (910 ONLY) 


TUCoPS is optimized to look best in Firefox® on a widescreen monitor (1440x900 or better).
Site design & layout copyright © 1986-2014 AOH