Visit our newest sister site!
Hundreds of free aircraft flight manuals
Civilian • Historical • Military • Declassified • FREE!


TUCoPS :: Phreaking Cellular - Other Manufacturers :: novatel1.txt

Novatel 8300, 8301 Programming




NOVATEL 8300, 8301

NOTES:  This is a single NAM unit.
        The ESN prefix is 142 decimal & 8E hex
        Novatel 1-800-527-2885

NAM PROGRAMING:

1.  Turn power on.

2.  Enter FUNCTION LOCK # 2 5 9 quickly.

3.  The volume up key increments the steps (does not store).

4.  The SEND key toggles single digit, A/B and SET/CLR options.

5.  The SEND key stores each step.

6.  Note that data for steps 13 through 16, system id lockouts,
    must be preceded with a # sign. IE: #00031 SEND.

7.  The END key completes and exits programing mode.


PROGRAMING DATA:

STEP#    #OF DIGITS/RANGE    DISPLAY        DESCRIPTION

01       CAN NOT BE CHANGED  CNF REV        SOFTWARE REVISION
02       CAN NOT BE CHANGED  ESN            HEX ESN
03       10 DIGITS           MIN            MIN (AREA CODE & TEL NUMBER)
04                           INIT REP       PRESS SEND TO INITIALIZE MEM
                                            LOCATIONS AND CALL TIMERS
05       00000 - 32767       SIDH           SYSTEM ID
06       333 OR 334          IPCH           INITIAL PAGING CHANNEL
07       2 DIGITS            GIM            GROUP ID (10 IN USA)

STEPS 08 THROUGH 10 ARE NOT ON ALL MODELS

08       333 ONLY            IDCCA          SYS A INITIAL PAGING CHANNEL
09       334 ONLY            IDCCB          SYS B INITIAL PAGING CHANNEL
10       1 ONLY              REG TBL        DATA SCAN TABLE SIZE

11       4 DIGITS            LOCK CODE 1    DISPLAY ONLY
12       4 DIGITS            LOCK CODE 2    DISPLAY ONLY
13       # 00000 - 32767     INVLD ID 1     SYSTEM ID LOCKOUT
14       # 00000 - 32767     INVLD ID 2     SYSTEM ID LOCKOUT
15       # 00000 - 32767     INVLD ID 3     SYSTEM ID LOCKOUT
16       # 00000 - 32767     INVLD ID 4     SYSTEM ID LOCKOUT
17       SET/CLR             OPTION LU      TOGGLE LOCAL USE
                                            (SET=1, CLR=0)
18       SET/CLR             OPTION EX      TOGGLE EXTENDED ADDRESS
                                            (SET=1, CLR=0)
19       SET/CLR             OPTION PS      TOGGLE PREFERRED SYSTEM
                                            (SET=A, CLR=B)
20       SET/CLR             OPTION IRI     TOGGLE ROAM INHIBIT
                                            (SET=NO ROAM, CLR=ALLOW ROAM)
21       SET/CLR             OPTION EE      TOGGLE UNKNOWN (DEFAULT IS SET)
                                            (SET=ON, CLR=OFF)
22       SET/CLR             OPTION FD      TOGGLE END TO END (DTMF) DIALING
                                            (SET=ON, CLR=OFF)
23       SET/CLR             OPTION MFD     TOGGLE EXTENDED DTMF
                                            (SET=ON, CLR=OFF)
24       SET/CLR             OPTION 32D     TOGGLE 32 DIGIT DIALING
                                            (SET=ON, CLR=OFF)
25       SET/CLR             OPTION MLH     TOGGLE MOBILE-LAND HANDOFF
                                            (SHOULD BE CLR)
26       SET/CLR             OPTION LMH     TOGGLE LAND-MOBILE HANDOFF
                                            (SHOULD BE CLR)
27       SET/CLR             OPTION CRU     TOGGLE CALL ROUND UP
                                            (SHOULD BE CLR)
28       SET/CLR             OPTION NLM     EUROPE ONLY
                                            (SHOULD BE CLR)
29       SET/CLR             OPTION HAL     TOGGLE HORN ALERT (NOT ALL PHONES)
                                            (SET=ON, CLR=OFF)
30       SET/CLR             OPTION ONL     TOGGLE ONLINE DIAGNOSTICS
                                            (SET=ON, CLR=OFF)


CHANGING LOCK CODE:

With phone out of programing mode press MENU and scroll with volume key
until display shows "old code, level 1", enter current lock code (step 11
above) phone will display "new code, LLLL".  Enter the new code and press SEND.

LOCK: F 1.  UNLOCK: Enter four digit code.

SYSTEM SELECT:

UNITS WITH STANDARD HANDSET: F SND then SND to select.
UNITS EQUIPPED WITH THE "COMPACT CONTROL UNIT": F 8 then 8 to select.
Depending on the programing options are: PREF A, PREF B or ONLY A, ONLY B.
  


TUCoPS is optimized to look best in Firefox® on a widescreen monitor (1440x900 or better).
Site design & layout copyright © 1986-2014 AOH