Visit our newest sister site!
Hundreds of free aircraft flight manuals
Civilian • Historical • Military • Declassified • FREE!


TUCoPS :: Phreaking Cellular - Other Manufacturers :: nec01.txt

NEC P300 Programming




NEC P300

NOTES:  This unit is available in single and quad NAM versions
        The ESN prefix is 135 decimal & 87 hex.
        An NEC programing adaptor must be used to program these units.
        NEC: 1-800-421-2141

NAM programing:

1.  Determine if you have a single NAM or quad NAM unit:  Press FCN 3 2,
    quad NAM units will display "NAM 1", 2, 3 or 4 and the phone number,
    single NAM units will display the phone number only.

2.  Later units follow a slightly different procedure, these are identified
    by an ESN greater than (13500)839600

ACCESSING PROGRAMING MODE ON SINGLE NAM UNITS:

1.  With the power off connect the NEC programing adaptor (part# MPS-A-3576).

2.  Turn power on.

3.  Press RCL # 7 1.

4.  Press # to increment and store each step.

5.  At any time press and hold CLR to complete and exit programing.

ACCESSING PROGRAMING MODE ON QUAD NAM UNITS WITH AN ESN LESS THAN 13500 839601

1.  With the power off connect the NEC programing adaptor (part# MPS-A-3576)

2.  Turn power on.

3.  (Optional) Press RCL # 7 6 N #, where N=0 (NAM 1), N=1 (NAM 2),
    N=2 (NAM 3).

4.  Press RCL # 7 1.

5.  Press # to increment and store each step.

6.  At any time press and hold CLR to complete and exit programing.
    Repeat steps 3 through 5 to program other NAMs if required.

ACCESSING PROGRAMING MODE ON QUAD NAM UNITS WITH AN ESN GREATER THAN
13500 839600

1.  With the power off connect the NEC programing adaptor (part# MPS-A-3576)

2.  Turn power on.

3.  Press RCL # 0 1 to enter test mode.

4.  (Optional) Press RCL # 7 6 N #, where N=0 (NAM 1), N=1 (NAM 2),
    N=2 (NAM 3).

5.  Press RCL # 7 1

6.  Press # to increment and store each step.

7.  At any time press and hold CLR to return to test mode.
    Repeat steps 4 through 6 to program other NAMs if required.

9.  From test mode press RCL # 0 2 to complete and exit programing.


PROGRAMING DATA

STEP#    #OF DIGITS/RANGE    DISPLAY        DESCRIPTION

01       10 DIGITS           Phone No.      MIN (AREA CODE & TEL#)
02       4 DIGITS            Lock Code      LOCK CODE
03       00000 - 32767       Home Area      SYSTEM ID
04       2 DIGITS            G.I. Mark      GROUP ID (10 IN USA)
05       0333 OR 0334        First P-CH     INITIAL PAGING CHANNEL
06       0 OR 1              Sys Select     PREFERRED SYSTEM (0=B, 1=A)
07       2 DIGITS            ACCOLC         ACCESS OVERLOAD CLASS
08       0 OR 1              MIM Mark       MIN MARK
09       0 OR 1              Local Use      LOCAL USE MARK
10       3 DIGITS            EMG No         EMERGENCY NUMBER (911)

LOCK & UNLOCK: F 6 four digit code then press 1 and scroll with volume keys to
select: Normal, PL (Partial Lock), FL (Full Lock), press STO to store.

SYSTEM SELECT: F 5 3 then volume or */# to scroll, STO to store.. 


TUCoPS is optimized to look best in Firefox® on a widescreen monitor (1440x900 or better).
Site design & layout copyright © 1986-2014 AOH