Visit our newest sister site!
Hundreds of free aircraft flight manuals
Civilian • Historical • Military • Declassified • FREE!

TUCoPS :: Unix :: General :: cert0089.txt

CERT Advisory CA-95:01 IP spoofing attacks and hijacked terminal connections


CERT(sm) Advisory CA-95:01
Original issue date: January 23, 1995
Last revised: September 24, 1996
              Supersession statement modified -
              IP spoofing portion is superseded by CA-96.21.

              A complete revision history is at the end of this file.

Topic: IP Spoofing Attacks and Hijacked Terminal Connections
- -----------------------------------------------------------------------------
               *** The IP Spoofing portion of this advisory
                   has been superseded by  CA-96.21 ***

The CERT Coordination Center has received reports of attacks in which
intruders create packets with spoofed source IP addresses. These attacks
exploit applications that use authentication based on IP addresses. This
exploitation leads to user and possibly root access on the targeted system.
Note that this attack does not involve source routing. Recommended solutions
are described in Section III below.

In the current attack pattern, intruders may dynamically modify the kernel of
a Sun 4.1.X system once root access is attained.  In this attack, which is
separate from the IP spoofing attack, intruders use a tool to take control of
any open terminal or login session from users on the system. Note that
although the tool is currently being used primarily on SunOS 4.1.x systems,
the system features that make this attack possible are not unique to SunOS.

We will update this advisory as we receive additional information.
Please check advisory files regularly for updates that relate to your site.

- -----------------------------------------------------------------------------

I.   Description

     This description summarizes both the IP spoofing technique that can
     lead to root access on a system and the tool that intruders are using to
     take over open terminal and login connections after they get root access.
     We are currently seeing attacks in which intruders combine IP spoofing
     with use of the tool. However, these are two separate actions. Intruders
     can use IP spoofing to gain root access for any purpose; similarly, they
     can highjack terminal connections regardless of their method of gaining
     root access.

     IP spoofing
        To gain access, intruders create packets with spoofed source IP
        addresses. This exploits applications that use authentication based on
        IP addresses and leads to unauthorized user and possibly root access
        on the targeted system. It is possible to route packets through
        filtering-router firewalls if they are not configured to filter
        incoming packets whose source address is in the local domain. It
        is important to note that the described attack is possible even if
        no reply packets can reach the attacker.

        Examples of configurations that are potentially vulnerable include
        - routers to external networks that support multiple internal
        - routers with two interfaces that support subnetting on the
          internal network
        - proxy firewalls where the proxy applications use the source
          IP address for authentication

        The IP spoofing attacks we are currently seeing are similar to those
        described in two papers: 1) "Security Problems in the TCP/IP Protocol
        Suite" by Steve Bellovin, published in _Computer Communication Review_
        vol. 19, no. 2 (April 1989) pages 32-48; 2) "A Weakness in the 4.2BSD
        Unix TCP/IP Software" by Robert T. Morris. Both papers are available
        by anonymous FTP from


           Bellovin paper:
           Morris paper:

        Services that are vulnerable to the IP spoofing attack include
           SunRPC & NFS
           BSD UNIX "r" commands
           anything wrapped by the tcp daemon wrappers - site dependent; check
               your configuration
           X windows
           other applications that use source IP addresses for authentication

     Hijacking tool
        Once the intruders have root access on a system, they can use a tool
        to dynamically modify the UNIX kernel. This modification allows them
        to hijack existing terminal and login connections from any user on the

        In taking over the existing connections, intruders can bypass one-time
        passwords and other strong authentication schemes by tapping the
        connection after the authentication is complete. For example, a
        legitimate user connects to a remote site through a login or terminal
        session; the intruder hijacks the connection after the user has
        completed the authentication to the remote location; the remote site
        is now compromised. (See Section I for examples of vulnerable

        Currently, the tool is used primarily on SunOS 4.1.x systems. However,
        the system features that make this attack possible are not unique to

        The CERT Coordination Center has been informed that any services
        that use Kerberos for authentication should not be vulnerable
        to an IP spoofing attack.  For more information about Kerberos, see


        Also note that the information and solution described in this advisory
        does not address the issue of mobile IP spoofing.

II. Impact

     Current intruder activity in spoofing source IP addresses can lead to
     unauthorized remote root access to systems behind a filtering-router

     After gaining root access and taking over existing terminal and login
     connections, intruders can gain access to remote hosts.

III. Solutions

     A. Detection

        IP spoofing
           If you monitor packets using network-monitoring software such as
           netlog, look for a packet on your external interface that has
           both its source and destination IP addresses in your local domain.
           If you find one, you are currently under attack. Netlog is
           available by anonymous FTP from
              MD5 checksum: 1dd62e7e96192456e8c75047c38e994b

           Another way to detect IP spoofing is to compare the process
           accounting logs between systems on your internal network. If
           the IP spoofing attack has succeeded on one of your systems,
           you may get a log entry on the victim machine showing a remote
           access; on the apparent source machine, there will be no
           corresponding entry for initiating that remote access.

        Hijacking tool
           When the intruder attaches to an existing terminal or login
           connection, users may detect unusual activity, such as commands
           appearing on their terminal that they did not type or a blank window
           that will no longer respond to their commands. Encourage your users
           to inform you of any such activity. In addition, pay particular
           attention to connections that have been idle for a long time.

           Once the attack is completed, it is difficult to detect. However,
           the intruders may leave remnants of their tools. For example, you
           may find a kernel streams module designed to tap into existing TCP

     B. Prevention

        IP spoofing
           The best method of preventing the IP spoofing problem is to install
           a filtering router that restricts the input to your external
           interface (known as an input filter) by not allowing a packet
           through if it has a source address from your internal network. In
           addition, you should filter outgoing packets that have a source
           address different from your internal network in order to prevent
           a source IP spoofing attack originating from your site.

           The following vendors have reported support for this feature:
             Bay Networks/Wellfleet routers, version 5 and later
             Cabletron - LAN Secure
             Cisco - RIS software all releases of version 9.21 and later
             Livingston - all versions

           3COM, Cisco Systems, and Morning Star Technologies have provided
           detailed information, which you can find in Appendix A of this

           If you need more information about your router or about firewalls,
           please contact your vendor directly.

           If your vendor's router does not support filtering on the inbound
           side of the interface or if there will be a delay in incorporating
           the feature into your system, you may filter the spoofed IP packets
           by using a second router between your external interface and your
           outside connection. Configure this router to block, on the outgoing
           interface connected to your original router, all packets that have a
           source address in your internal network. For this purpose, you can
           use a filtering router or a UNIX system with two interfaces that
           supports packet filtering.

           NOTE: Disabling source routing at the router does not protect you
                 from this attack, but it is still good security practice to
                 do so.

           Additional information about protecting yourself from IP spoofing
           attacks is in Updates section at the end of this file; these
           updates were added after the initial release of the advisory.

         Hijacking tool
           There is no specific way to prevent use of the tool other than
           preventing intruders from gaining root access in the first place.
           If you have experienced a root compromise, see Section C for general
           instructions on how to recover.

     C. Recovery from a UNIX root compromise

        1. Disconnect from the network or operate the system in
           single-user mode during the recovery.  This will keep users
           and intruders from accessing the system.

        2. Verify system binaries and configuration files against the
           vendor's media (do not rely on timestamp information to
           provide an indication of modification).  Do not trust any
           verification tool such as cmp(1) located on the compromised
           system as it, too, may have been modified by the intruder.
           In addition, do not trust the results of the standard UNIX
           sum(1) program as we have seen intruders modify system
           files in such a way that the checksums remain the same.
           Replace any modified files from the vendor's media, not
           from backups.
                                -- or --

           Reload your system from the vendor's media.

        3. Search the system for new or modified setuid root files.

                find / -user root -perm -4000 -print

           If you are using NFS or AFS file systems, use ncheck to
           search the local file systems.

                ncheck -s /dev/sd0a

        4. Change the password on all accounts.

        5. Don't trust your backups for reloading any file used by
           root.  You do not want to re-introduce files altered by an


Appendix A: Vendor Information


The following information has been provided by 3COM for their customers.
- ------------------------------------------------------------------------------
                     Begin Text Provided by 3COM

The following examples illustrate how NETBuilder software can be
configured to support the CERT Advisory recommendations.  Each of
these examples assumes that the value of the -IP FilterDefAction
parameter is configured to Forward.

Example 1:

This example illustrates a two-router solution where the internal
network is configured with non-contiguous IP network numbers.  The
filters are installed on the border router which can only have two
interfaces.  In a two-port router, an output filter on one port is
equivalent to an input filter on the other port.  Please refer to
Figure 1:

Figure 1: Non-Contiguous IP Networks

           | Border |   |   |Internal|---
Outside  --| Router |---|---| Router |
                        |   |        |---

The border router is configured with the following filters:

ADD -IP FilterAddrs >

ADD -IP FilterAddrs >

ADD -IP FilterAddrs >

ADD -IP FilterAddrs <>

ADD -IP FilterAddrs <>

ADD -IP FilterAddrs <>

This configuration prevents the external attack and allows the
internal router to route traffic between networks,,
and  This configuration also works for the cascade topology
shown in Figure 2.

Figure 2: Non-Contiguous IP Networks (alternate topology)

                        |                |
           | Border |   |   |Internal|   |   |Internal|
Outside ---| Router |---|---| Router |---|---| Router |---
                        |                |
                        |                |

Example 2:

The second example illustrates a two-router solution when the internal
network is configured with multiple subnets of the Class B network
address -  The subnet mask is  Please refer
to Figure 3.

Figure 3: Subnets on the Internal Network

           | Border |   |   |Internal|---
Outside  --| Router |---|---| Router |
                        |   |        |---
              Subnet Mask =

The border router is configured with the following filter:

ADD -IP FilterAddrs > Discard

This configuration prevents the external attack and allows the internal route
to route traffic between all subnetworks of  In this example, a
single filter can protect multiple subnets.

Example 3:

The final example illustrates a two-router solution when the internal
network is configured with contiguous IP network numbers.  Assume the
service provider has provided the subscriber with the CIDR block  Please refer to Figure 4:

Figure 4: Multiple Contiguous IP Networks

           | Border |   |   |Internal|---
Outside  --| Router |---|---| Router |
                        |   |        |---
               CIDR Mask =

The border router is configured with the following filter:

ADD -IP FilterAddrs >

This configuration prevents the external attack and allows the
internal router to route traffic between supernets of  In this example, a single filter can protect
multiple contiguous IP networks numbers assigned as a CIDR block.

                      End Text Provided by 3COM
- ------------------------------------------------------------------------------

Cisco Systems

The following information has been provided by Cisco Systems for
their customers.
- -------------------------------------------------------------------------------
                     Begin Text Provided by Cisco

The defense is to set up your internet firewall router to deny packets
from OUTSIDE your network that claim to have a source address INSIDE
your network.

example configuration:

access-list 101 deny ip
access-list 101 deny ip
[ of your firewall goes here..]

and so on, where access list 101 describes all possible source
addresses on YOUR network.  The example above describes a network with
internal source addresses of 131.108.x.x and 198.92.93.x

Note: If you use only the two line example described above without any
other access-list commands, ALL TRAFFIC will be stopped on your interface
since the implicit action of an unmatched access-list is to deny packets.

If you only want source address spoofing protection and nothing else, add
the line

access-list 101 permit ip

to the end of the earlier example.  This is NOT an optimal solution since
there are many other possible attacks barring the IP spoofing fixed here.

There are articles on this topic on the CIO information service and various
USENET mailing lists.  You can telnet to or point your WWW
browser at

Anyway!  Once you have defined an appropriate access list you can apply them
to the vulnerable interfaces.

Assuming your interface serial 0 faces the Internet:

interface serial 0
description interface facing the big, bad Internet
ip access-group 101 in

for a router running 9.21 or later.

If you DO NOT have 9.21, an upgrade is NOT required if your internet
firewall is a two port router (which it should be).  Simply
apply access-list 101 as described above to the LAN interface and not
the serial interface.


interface ethernet 0
description LAN port on my internet router
ip access-group 101

The essence of this defense is that any packets coming from the internet that
claim to be from your network are tossed, thereby preventing the style of
attack described below.

Also, for good measure, ALL INTERNET FIREWALLS should have the global

no ip source-route

Which helps prevent other forms of spoofing attack from outside.

For further discussion of sequence number guessing attacks, see papers
by Morris and also Bellovin in

                      End Text Provided by Cisco
- -------------------------------------------------------------------------------

Morning Star Technologies, Inc.

The following information has been provided by Morning Star
Technologies for their customers.
- -------------------------------------------------------------------------------
                 Begin Text Provided by Morning Star


Here is how to configure your Internet interface to prevent such

    1) Locate the packet filter file controlling your interface to the
       Internet.  For users of Morning Star PPP, this will usually be
       /etc/ppp/Filter, /usr/etc/ppp/Filter, or /usr/lib/ppp/Filter.
       Users of Express routers should look in the file called Filter.
       Check your pppd (or frd for frame relay users) command line for
       a possibly different filter filename, or look for `ifconfig
       [interface] filter [filename]' commands in your Express
       router's rc.boot file.

    2) Within the packet filter file, locate the individual filter
       specification used by your Internet connection.  It will begin
       with either the hostname or IP address of the remote side of a
       PPP connection, the local hostname or IP address of a frame
       relay, Ethernet, or RF modem connection, or the special keyword
       `default' for any type of connection.

    3) Within the appropriate filter specification, locate the `pass'

    4) Add the following line to the beginning of the pass filter:


       This will cause all transmitted or received IP packets with
       Source Routing options to be discarded.

    5) Determine the IP network number or numbers of your internal
       network or networks.  Insert a set of lines similar to the
       following pair following the source route rule described in
       step 4) above for each internal network number.


       This will block all received packets containing a source IP
       address in your internal network, and will block the
       transmission of all packets containing a destination IP address
       in your internal network.  For example, we have Class B network
       137.175, so our Filter file contains


       If you don't have a whole IP network, you'll also need to
       specify a netmask.  For example, an organization that has both
       the Class C network and the Class-C-sized
       segment of the Class A net 10 would add these lines



Do not configure any of your systems to trust any of the Unix `r'
commands (rlogin, rsh, etc.) from any machine outside your firewall.
Such systems can be spoofed as easily as internal machines, but
spoofed packets cannot be detected at your firewall.


If you need any help with these modifications, call our customer
support hotline at +1 800 558 7827 or send us e-mail at
support@MorningStar.Com.  When sending e-mail, please include the
phrase CERT SECURITY PROBLEM in your Subject: header.  We will provide
assistance with this to all Morning Star customers, even for those
without current customer support agreements.  If you do not have a
current support agreement, use the phrase `CERT SECURITY PROBLEM' when
asked for your customer support number.

                  End Text Provided by Morning Star
- ------------------------------------------------------------------------------

- ---------------------------------------------------------------------------
The CERT Coordination Center thanks Eric Allman, Steve Bellovin, Keith Bostic,
Bill Cheswick, Mike Karels, and Tsutomu Shimomura for contributing to our
understanding of these problems and their solutions.
- ---------------------------------------------------------------------------

If you believe that your system has been compromised, contact the CERT
Coordination Center or your representative in Forum of Incident
Response and Security Teams (FIRST).

If you wish to send sensitive incident or vulnerability information to
CERT staff by electronic mail, we strongly advise that the e-mail be
encrypted.  The CERT Coordination Center can support a shared DES key, PGP
(public key available via anonymous FTP on, or PEM (contact
CERT staff for details).

Internet E-mail:
Telephone: +1 412-268-7090 (24-hour hotline)
           CERT personnel answer 8:30 a.m.-5:00 p.m. EST(GMT-5)/EDT(GMT-4),
           and are on call for emergencies during other hours.
Fax: +1 412-268-6989

CERT Coordination Center
Software Engineering Institute
Carnegie Mellon University
Pittsburgh, PA 15213-3890

Past advisories, CERT bulletins, information about FIRST representatives,
and other information related to computer security are available for anonymous
FTP from

Copyright 1995, 1996 Carnegie Mellon University
This material may be reproduced and distributed without permission provided
it is used for noncommercial purposes and the copyright statement is

CERT is a service mark of Carnegie Mellon University.


Additional steps you can take to address IP spoofing:

For IP spoofing to be successful, intruders rely on two machines to
trust each other through the use of the .rhosts file or the
/etc/hosts.equiv file.  By exploiting applications that use
authentication based on IP addresses (e.g., rsh and rlogin), intruders
can gain user or root access on targeted hosts.

We suggest that you use TCP wrappers to allow access from only a
select few machines.  Although this is not a complete solution, it
does reduce your susceptibility to attack.  Alternatively, change the
configuration of your Internet gateway so that rlogin and rsh from the
Internet to hosts in your domain are blocked.  If that is not
possible, disable the rlogin and rsh services on all of your hosts.

Some sites have turned off source routing thinking that this would
prevent IP spoofing attacks. This is NOT the case. Although we
encourage sites to turn off source routing this does not prevent IP
spoofing attacks. To prevent such attacks it is necessary to undertake
packet filtering as described in the advisory.

In addition to the attacks described in this advisory, we are now
seeing attacks in which intruders gain access to a site using loopback
IP addresses rather than IP addresses particular to that site.

We recommend that in addition to the packet filtering suggestions
described in Section III B of the advisory, you configure the
filtering router to filter inbound packets in the following IP ranges:       -         (loopback)        -          (reserved)      -          (reserved)     -         (reserved)

Finally, we encourage you to consider using network monitoring tools to check
for signs of IP spoofing attacks. Argus is a network monitoring tool that
uses a client-server model to capture data and associate it into
"transactions." The tool provides network-level auditing; it can verify
compliance to a router configuration file, and information is easily adapted
to protocol analysis, intrusion detections, and other security needs. Argus is
available from


Revision history

Sep. 24, 1996  Supersession statement modified
Sep. 19, 1996  Superseded by CA-96.21 [IP spoofing portion only]
Aug. 30, 1996  Information previously in the README was inserted
                        into the advisory.
    --         Appendix A - added vendor information as it was received: Cisco
                        Systems, Morning Star Technologies, and 3COM.
May 10, 1996   Updates section - added pointer to the Argus tool.
Aug. 04, 1995  Updates section - added more information on IP spoofing
                        and recommendations for detecting such activity.
Aug. 04, 1995  Sec. I - added notes about Kerberos and mobile IP spoofing.

Version: 2.6.2


TUCoPS is optimized to look best in Firefox® on a widescreen monitor (1440x900 or better).
Site design & layout copyright © 1986-2015 AOH