Visit our newest sister site!
Hundreds of free aircraft flight manuals
Civilian • Historical • Military • Declassified • FREE!


TUCoPS :: Networks :: austpac0.txt

Austpac Part 0




===---->>>>> Compiled by Soft Beard 1990 <<<<<----===

Accessing Telecom Australia`s AUSTPAC service.

AUSTPAC is a great way to connect to major companies. This is how it works:
You call AUSTPAC for 20cents, then you can make up to 5 connect tries 
before it cuts you off. When you dial a number in the format ?xxxxxxxxx
you will be connected at the service providers cost, ie. if it is a company
in the US, the company will pay the bill!! This is great as most companies
allow you to attempt to log on 3 times, but with AUSTPAC you can go through
15 password attempts per call. Some of the systems even have limitless
attempts, they pay for the american call and you sit there all night going
through password libraries!!!

Phone Numbers:
 01921 - v21, 300baud
 01922 - v22, 1200baud
 01923 - v23, 1200/75baud
 01924 - v22bis, 2400baud
(not sure about 9600, 19200 baud but who can afford them!!??)

The only problem with the service is that it acts as a centre point and while
you connect to it at 2400baud it actually connects to the service at 9600
or 19200 baud depending on the service. This unfortunately can cut you off
if you are receiving text so it is best to press [SPACE] or something similar
every few minutes so you don`t get an inactivity log off. When receiving
files this is a pain and you USUALLY get cut off so make sure if downloading
you are Batch-Downloading.

There are thousands and thousands of services on AUSTPAC. Pick up a list from
your local HackBBS or write your own simple comms program to go through a
big list, 5 per call, 4c a try, so this works out to around $4.00 to check
almost 100 NUA`s. 

An NUA is the name of the number to a service provider specified with 
?xxxxxxxxx. It is sometimes the case where you also need to provide an NUI
after the initial NUA in the same format ?xxxxxxxxx to connect.

A complete list of error codes is listed below:

   ERROR                       				                     	   MESSAGES                  DESCRIPTION OF THE ERROR MESSAGES
  ========     ============================================================
  
  CLR CONF     CLEAR CONFIRMATION - THE LOCAL PAD HAS CLEARED THE CALL.
  
  CLR DER      OUT OF ORDER       - THE X.25 LINK BETWEEN THE NETWORK AND  
                                    THE REMOTE PAD IS DOWN.
                                    (FRAME AND/OR PACKET LEVEL)
  
  CLR DTE      HOST DISCONNECT    - A CALL CLEAR HAS BEEN INITIATED BY THE
                                    REMOTE PAD.
  
  CLR ERR      PROCEDURE ERROR    - THE NETWORK HAS DETECTED A PROCEDURE
                                    ERROR ON THE LOCAL X.25 LINK CAUSED BY
                                    THE LOCAL PAD.
  
  CLR INV      INVALID FACILITY   - THE LOCAL PAD HAS REQUESTED A FACILITY
                                    THAT IS NOT VALID OR IS NOT PROVISIONED
                                    ON THE NETWORK.
  
  CLR NA       ACCESS BARRED      - A CALL REQUEST INTO A CLOSED USER GROUP
                                    HAS BEEN CLEARED BECAUSE THE USER HAS
                                    NOT BEEN VALIDATED BY THE USER GROUP.
  
  CLR NC       NETWORK CONGESTION - THE CALL REQUEST TEMPORARILY CANNOT BE
                                    ROUTED THROUGH THE NETWORK.  (PROBABLE
                                    CAUSE - A NETWORK NODE IS DOWN.)
  
  CLR NP       NOT OBTAINABLE     - THE DESTINATION OF THE CALL REQUEST IS
                                    OUT OF THE NUMBERING PLAN OR IS NOT 
                                    ASSIGNED IN THE NETWORK.
  
  CLR OCC      NUMBER BUSY.       - THE NETWORK HAS DETERMINED THAT ALL
                                    AVAILABLE LCN'S TO THE REMOTE PAD ARE
                                    IN USE.  THE CALL REQUEST CANNOT BE
                                    COMPLETED AT THIS TIME.
  
  CLR PAD      PAD CLEARING       - THE CALL HAS BEEN CLEARED BY THE LOCAL
                                    PAD BECAUSE AN INVITATION TO CLEAR WAS
                                    RECEIVED FROM THE REMOTE PAD.
  
  CLE RPE      PROCEDURE ERROR    - THE NETWORK HAS DETECTED A PROCEDURE
                                    ERROR ON THE REMOTE X.25 LINK CAUSED
                                    BY THE REMOTE PAD.
  
  
  
         NOTE:   ALL CAUSE CODES NOT LISTED ABOVE WILL BE DISPLAYED
         -----   IN A THREE DECIMAL NUMBER FORMAT.
  
                 THE DIAGNOSTIC CODE, IF PRESENT, WILL BE DISPLAYED
                 AFTER THE THREE CHARACTER/NUMBER CAUSE CODE.
       
                        EG:   CLR DTE XXX   OR   CLR XXX XXX
       
 
  CLR ERR 200     THE LOCAL PAD RECEIVED A RESTART REQUEST.
  
  CLR ERR 201     A LOCAL PROCEDURE ERROR CAUSES THE NETWORK TO SEND A
                  RESTART REQUEST TO THE LOCAL PAD.
  
  CLR ERR 203     NETWORK CONGESTION CAUSED THE NETWORK TO SEND A RESTART
                  REQUEST TO THE LOCAL PAD.
  
  CLR ERR 207     NETWORK RESTART.
  
  CLR ERR 231     THE LOCAL PAD RECEIVED A FRAME-LEVEL "COMMAND REJECT/
                  FRAME REJECT" WITH THE Y-BIT SET TO 1 BECAUSE THE PAD
                  SENT AN "I" FRAME EXCEEDING THE MAXIMUM LENGTH ALLOWED.
                  THE CLEAR REQUEST IS SENT AT THE PACKET-LEVEL.
  
  CLR ERR 232     THE LOCAL PAD CLEARED THE CALL BECAUSE IT RECEIVED AN
                  INVITATION TO CLEAR FROM THE NETWORK.
  
  CLR ERR 237     CALL CLEARED BECAUSE THE USER DROPPED CARRIER (DCD).
  
  CLR ERR 238     THE TRANSPORT-LEVEL OF X.25 ISSUED A CALL CLEAR BECAUSE
                  IT RECEIVED AN ILLEGAL DATA PACKET.
  
  CLR ERR 239     THE LOCAL PAD INITIATED A CALL CLEAR FOR ONE OF THE
                  FOLLOWING REASONS:
                  -  THE REMOTE END HAS DROPPED THE DCD SIGNAL.
                  -  THE LOCAL PAD HAS TOO MANY BUFFERS WAITING TO BE
                     TRANSMITTED.
  
  ERR 240         THE LOCAL PAD HAS TERMINATED THE CALL REQUEST BECAUSE
                  THERE WAS NO RESPONSE FROM THE REMOTE PAD WITHIN THE
                  SPECIFIED TIME PERIOD (T2 TIMER).
  
  ERR 241         THERE ARE NO LOGICAL CHANNELS AVAILABLE TO ISSUE A CALL
                  REQUEST.
  
  ERR 242         THE CALL REQUEST CANNOT BE SENT BECAUSE THE PACKET-LEVEL
                  RESTART PROCEDURE HAS NOT BEEN COMPLETED ON THE 
                  ASSOCIATED X.25 LINK.
  
  ERR 250         THE CALL REQUEST CANNOT BE COMPLETED BECAUSE THE ADDRESS
                  OF THE REMOTE PAD HAS NOT BEEN DEFINED IN THE LOCAL PAD.
  
  ERR 251         THE REMOTE PAD DID NOT RESPOND TO A CALL REQUEST FOR A
                  SHAREABLE LOGICAL CHANNEL.
  
  ERR 252         INVALID DATA RECEIVED FOR A SHAREABLE LOGICAL CHANNEL.
                  THERE IS A MISMATCH ON THE DATE LENGTH.
  
  ERR 253         ONE OF THE FOLLOWING INVALID OPERATIONS WAS ATTEMPTED:
                  -  ATTEMPT TO DISCONNECT A PORT THAT WAS NOT CONNECTED.
                  -  ATTEMPT TO CONNECT A PORT THAT IS ALREADY CONNECTED.
                  -  ATTEMPT TO CONNECT A PORT THAT IS ALREADY ASSIGNED
                     AS A PVC.
  
  ERR 254         THE LOCAL PAD IS BEING REMOTELY CONFIGURED.  CALL AND
                  CLEAR REQUESTS ARE TEMPORARILY NOT ALLOWED FROM THIS 
                  PORT.

  DEC. HEX.            DESCRIPTION OF THE C.C.I.T.T. DIAGNOSTIC CODES.
  ==== ====       =========================================================
  
  
  000   00        NO ADDITIONAL INFORMATION.
  001   01        INVALID PACKET SEQUENCE NUMBER SENT.
  002   02        INVALID PACKET SEQUENCE NUMBER RECEIVED.
  
  
  
  016   10        PACKET TYPE INVALID.             (GENERAL DESCRIPTION)
  017   11        PACKET TYPE INVALID FOR STATE R1
  018   12        PACKET TYPE INVALID FOR STATE R2 - DTE RESTART REQUEST
  019   13        PACKET TYPE INVALID FOR STATE R3 - DCE RESTART INDICATION
  020   14        PACKET TYPE INVALID FOR STATE P1 - DTE READY
  021   15        PACKET TYPE INVALID FOR STATE P2 - DTE WAITING
  022   16        PACKET TYPE INVALID FOR STATE P3 - DTE INCOMING CALL
  023   17        PACKET TYPE INVALID FOR STATE P4 - DATA TRANSFER
  024   18        PACKET TYPE INVALID FOR STATE P5   
  025   19        PACKET TYPE INVALID FOR STATE P6 - DTE CLEAR REQUEST
  026   1A        PACKET TYPE INVALID FOR STATE P7 - CLEAR INDICATION (DCE)
  027   1B        PACKET TYPE INVALID FOR STATE D1 - FLOW CONTROL READY
  028   1C        PACKET TYPE INVALID FOR STATE D2 - RESET REQUEST
  029   1D        PACKET TYPE INVALID FOR STATE D3 - RESET INDICATION
  
  
  
  032   20        PACKET NOT ALLOWED.              (GENERAL DESCRIPTION)
  033   21        UNIDENTIFIABLE PACKET.
  034   22        CALL ON ONE-WAY LOGICAL CHANNEL.
  035   23        INVALID PACKET TYPE ON A PERMANENT VIRTUAL CIRCUIT.
  036   24        PACKET ON UNASSIGNED LOGICAL CHANNEL.
  037   25        REJECT NOT SUBSCRIBED TO.
  038   26        PACKET TOO SHORT.
  039   27        PACKET TOO LONG.
  040   28        INVALID GENERAL FORMAT IDENTIFIER.
  041   29        RESTART OR REGISTRATION PACKET WITH NON-ZERO IN BITS 1-4
                    OF THE FIRST OCTET OR IN BITS 1-8 OF THE SECOND OCTET. 
  042   2A        PACKET TYPE NOT COMPATIBLE WITH FACILITY.
  043   2B        UNAUTHORIZED INTERRUPT CONFIRMATION.
  044   2C        UNAUTHORIZED INTERRUPT.
  045   2D        UNAUTHORIZED REJECT.
  
  
  
  048   30        TIMER EXPIRED.                   (GENERAL DESCRIPTION)
  049   31        TIMER EXPIRED FOR INCOMING CALL.
  050   32        TIMER EXPIRED FOR CLEAR INDICATION.
  051   33        TIMER EXPIRED FOR RESET INDICATION.
  052   34        TIMER EXPIRED FOR RESTART INDICATION.



  064   40        CALL SET-UP, CALL CLEARING       (GENERAL DESCRIPTION)
                    OR REGISTRATION PROBLEM.
  065   41        FACILITY/REGISTRATION CODE NOT ALLOWED.
  066   42        FACILITY PARAMETER NOT ALLOWED.
  067   43        INVALID CALLED ADDRESS.
  068   44        INVALID CALLING ADDRESS.
  069   45        INVALID FACILITY/REGISTRATION LENGTH.
  070   46        INCOMING CALLS BARRED.
  071   47        NO LOGICAL CHANNEL AVAILABLE.
  072   48        CALL COLLISION.
  073   49        DUPLICATE FACILITY REQUESTED.
  074   4A        NON-ZERO ADDRESS LENGTH.
  075   4B        NON-ZERO FACILITY LENGTH.
  076   4C        FACILITY NOT PROVIDED WHEN EXPECTED.
  077   4D        INVALID CCITT SPECIFIED DTE FACILITY.
  
  
  
  080   50        MISCELLANEOUS.                   (GENERAL DESCRIPTION)
  081   51        IMPROPER CAUSE CODE FROM DTE.
  082   52        NOT ALIGNED OCTET.
  083   53        INCONSISTENT 'Q' BIT SETTING.
  
  
  
  112   70        INTERNATIONAL PROBLEM.           (GENERAL DESCRIPTION)
  113   71        REMOTE NETWORK PROBLEM.
  114   72        INTERNATIONAL PROTOCOL PROBLEM.
  115   73        INTERNATIONAL LINK OUT OF ORDER.
  116   74        INTERNATIONAL LINK BUSY.
  117   75        TRANSIT NETWORK FACILITY PROBLEM.
  118   76        REMOTE NETWORK FACILITY PROBLEM.
  119   77        INTERNATIONAL ROUTING PROBLEM.
  120   78        TEMPORARY ROUTING PROBLEM.
  121   79        UNKNOWN CALLED DNIC.
  122   7A        MAINTENANCE ACTION.


  DEC. HEX.            DESCRIPTION OF THE PAD/SWITCH DIAGNOSTIC CODES.
  ==== ====       =========================================================
  
  160   A0        NON-ZERO RESET CAUSE CODE FROM DTE.
  161   A1        DATA PACKET TOO LONG.
  162   A2        INTERRUPT PACKET TOO LONG.
  163   A3        INTERRUPT PACKET TOO SHORT (NO USER DATA).
  164   A4        INTERRUPT CONFIRMATION TOO LONG.
  165   A5        RECEIVER READY TOO LONG. 
  166   A6        RECEIVER NOT READY TOO LONG.
  167   A7        RESET TOO LONG.
  168   A8        RESET CONFIRMATION TOO LONG.
  169   A9        INVALID 'Q' BIT IN PACKET.
  170   AA        PACKET WINDOW RANGE EXCEEDED.
  171   AB        UNABLE TO TRANSMIT PACKET.
  172   AC        'Q' BIT SET IN NON-DATA PACKET.
  173   AD        RECEIVED P(R) EXCEEDED WINDOW SIZE.
  174   AE        NETWORK INTERNAL ERROR.
  175   AF        RESET PACKET TOO SHORT (NO CAUSE CODE FIELD).
  176   B0        REJECT PACKET TOO LONG.
  177   B1        INVALID PACKET I.D.
  182   B6        PACKET FORMAT INVALID.
  183   B7        FACILITY OCTET COUNT BALANCE OF PACKET.
  184   B8        INVALID PACKET DETECTED.
  185   B9        FACILITY FIELD OCTET COUNT 63.
  186   BA        OUTGOING CALLS BARRED.
  187   BB        INCOMING CALLS BARRED.
  189   BD        CALLED ADDRESS TOO LONG.
  190   BE        CALLED ADDRESS TOO SHORT.
  191   BF        CALLING ADDRESS TOO LONG.        
  192   C0        CALLING ADDRESS TOO SHORT.
  193   C1        ERROR CALLED ADDRESS.         
  194   C2        ERROR CALLING ADDRESS.
  195   C3        USER DATA FIELD TOO LARGE.
  198   C6        FACILITY NEGOTIATION INVALID.
  200   C8        SVC CLEARED - LOCAL ERROR - OTHER SIDE OF TP.
  202   CA        NO LCB AVAILABLE FOR INCOMING CALL REQUEST.
  203   CB        CALL PACKET LOST AFTER CALL COLLISION.
  204   CC        GFI/LCN OF INCOMING CALL DOES NOT MATCH CONFIGURATION.
  210   D2        CALL CLEARED BECAUSE NO ROUTING POSSIBLE (TY:E).
  211   D3        CALL CLEARED BECAUSE NO ROUTING POSSIBLE (TY:A).
  212   D4        CALL CLEARED BECAUSE OF CONGESTION.
  213   D5        CALL CLEARED BY CALL DISCONNECT SCL COMMAND.
 
 
  DEC. HEX.              DESCRIPTION OF THE C.C.I.T.T. CAUSE CODES.
  ==== ====       =========================================================
  
  000   00        DTE ORIGINATED
  
  001   01        NUMBER BUSY
  
  003   03        INVALID FACILITY REQUEST
  
  005   05        NETWORK CONGESTION
  
  009   09        OUT OF ORDER
  
  011   0B        ACCESS BARRED
  
  013   0D        NOT OBTAINABLE
  
  017   11        REMOTE PROCEDURE ERROR
  
  019   13        LOCAL PROCEDURE ERROR
  
  021   15        RPOA OUT OF ORDER
  
  025   19        REVERSE CHARGING ACCEPTANCE NOT SUBSCRIBED
  
  033   21        INCOMPATIBLE DESTINATION
  
  041   29        FAST SELECT ACCEPTANCE NOT SUBSCRIBED
  

************************* END OF ERROR CODES **************************

Well, I hope that got you off to a good start. You should now understand  
how to hack services and you should understand the various error codes....

Hackers will rule the world 4 ever!!

Seeya round, Soft Beard, the Pirate, Ahoy There!!

Imported to the U.S. by P-80 Systems 304-744-2253



TUCoPS is optimized to look best in Firefox® on a widescreen monitor (1440x900 or better).
Site design & layout copyright © 1986-2014 AOH