Visit our newest sister site!
Hundreds of free aircraft flight manuals
Civilian • Historical • Military • Declassified • FREE!


TUCoPS :: General Information :: comsecfq.txt

Computer Security/Compromise FAQ




Archive-name: computer-security/compromise-faq
Posting-frequency: monthly
Last-Modified: 1994/06/01
Version: 1.6


        Compromise:  What if your Machines are Compromised by an Intruder.

        This FAQ deals with some suggestions for securing your Unix machine
after it has already been compromised.  Even if your machines have not been
compromised, there are many helpful tips on securing machine in this paper.
I would appreciate any suggestions.  This FAQ will be posted monthly.


1.  Try to trace/follow the intruder back to his origin via looking at
  a) who
  b) w
  c) last
  d) lastcomm
  e) netstat
  f) snmpnetstat
  g) and router information.
  h) /var/adm/messages (many crackers send e-mail to their "home" accounts)
  i) syslog (sends logs to other hosts as well)
  j) wrapper logs
  k) do a 'finger' to all local users(and check where they last logged in from)


        Footnote: 'who', 'w', 'last', and 'lastcomm' are commands that  rely
on /var/adm/pacct, /usr/adm/wtmp, and /etc/utmp to report the information to
you.  Most backdoors will keep the intruder from being shown in these logs.
Even if the intruder has not installed any backdoors yet, it is trivial to
remove any detection in these logs.  But they may just forget about one or two
of them.  Especially if you have some additional, non-standard ones.


        Suggestion: Install xinetd or tcp_wrapper that will log all
connections to your machine to see if someone is knocking on its doors.
Forward syslogs to another machine so intruder will not easily detect  the
logs and modify. Other possibilities: netlog from net.tamu.edu:/pub/security.


        It might be wise to monitor the intruder via some ethernet sniffer
to see how he is exploiting his systems before taking corrective measures.

2.  Close the machine from outside access.  Remove from network to stop
further access via intruder.  If the intruder finds out that the
administrator is unto him, he may try to hide his tracks by rm -rf /.

3.  Check the binaries with the originals.  Especially check the following
binaries because they are commonly replaced backdoors for regaining access:

  a) /bin/login
  b) all the /usr/etc/in.* files (ie. in.telnetd)
  c) and /lib/libc.so.* (on Suns).
  d) anything called from inetd


        Other commonly replaced backdoor binaries:
  a) netstat - allows hiding connections
  b) ps - allows hiding processes (ie Crack)
  c) ls - allows hiding directories
  d) ifconfig - hides the fact that promiscuity mode is on the ethernet
  e) sum - fools the checksum for binaries, not necessarily replaced anymore
because its possible to change the checksum of the binaries to the correct
value without modifying sum. *EMPHASIZE* Do NOT Rely on sum.

        Use 'ls -lac' to find the real modification time of files.  Check
/etc/wtmp (if you still have one) for any system time adjustments.  Check the
files with the distribution media (CD or tape) or calculate MD5 checksums and
compare them with the originals kept offline (you did calculate them sometime
ago, didn't you?) Suggestion: cmp(1) the files with copies that are known to
be good.

        Another popular backdoor is suid'ing a common command (ie.
/bin/time) to allow root access with regular accounts.

To find all suid programs you may use:

        find / -type f -perm -4000 -ls


        To be thorough you may need to re-load the entire OS to make sure
there are no backdoors.  Tripwire helps prevent modifying binaries and system
files (ie. inetd.conf) on the system, without the administrator knowing.

4.  Implement some password scheme for your users to verify that they change
their passwords often.  Install anlpasswd, npasswd, or passwd+ in place of
passwd (or yppasswd) so that your users are forced to set reasonable
passwords. Then run Crack to make sure that your users aren't bypassing the
password check.  Crack ensures that users are picking difficult passwords.
With the network, clear text passwords are a problem.  Other possible
choices:  smart hubs (stops ethernet sniffing of the whole LAN) and one-time
password technology.


5.  Check all the users' .rhosts and .forward files to make sure none of them
are weird or out of the ordinary. If .rhosts file contains '+ +', the account
can be accessed anywhere by anyone without a password.  COPS has a scripts
for checking .rhosts.

         find / -name .rhosts -ls -o -name .forward -ls

Look also for all the files created/modified in the time you are suspecting
the break-in has taken place, eg:

        find / -ctime -2 -ctime +1 -ls

To find all the files modified not less than one day ago, but not more than 2.

All .login, .logout, .profile, .cshrc files are also worth looking at (at
least for the modification date/time).  Make sure there are no '.rhosts' for
the locked or special accounts (like 'news', 'sundiag', 'sync', etc.)
The shell for such accounts should be something like '/bin/false' anyway (and
not '/bin/sh') to make them more secure. Also search for directories that have
like ". ", ".. " as names.  They are usually found in /tmp , /var/tmp,
/usr/spool/* and any other publicly writeable directory.


6.  Check to make sure your NFS exports are not world writable to everyone.
NFSwatch, a program by David Curry, will log any NFS transactions that are
taking place.  Try 'showmount -e' to see whether system agrees with your
opinion of what are you exporting and where.  There are bugs in some nfsd
implementations which ignore the access lists when they exceed some limit (256
bytes).  Check also what are you IMPORTING!!!  Use 'nosuid' flag whenever
possible. You do not want to be cracked by a sysadm from another host (or a
cracker there) running suid programs mounted via NFS, do you?


7.  Make sure you have implemented the newest sendmail daemon. Old sendmail
daemons allowed remote execution of commands on any Unix machine. See the
computer-security/security-patch FAQ.

8.  Try to install all the security patches available from the vendor on your
machine.  See the computer-security/security-patch FAQ.

9.  Here is a check list:

 o Do an rpcinfo -p  on your machine to make sure it is not running any
processes that are not needed. (ie. rexd).

 o Check for '+' in /etc/hosts.equiv.

 o Check whether tftp is disabled on your system.  If not - disable it, or at
least use '-s' flag to chroot it to some safe area, if you really can't live
without it (it is mostly used for booting up Xterminals, but sometimes can be
avoided by NFS-mounting appropriate disks).  Under no circumstances you should
run it as root.  Change the line describing it in /etc/inetd.conf to something
like:

    tftp dgram  udp  wait  nobody  /usr/etc/in.tftpd  in.tftpd -s /tftpboot

or better yet, use tcpd wrapper program to protect it from addresses which
should not get access to tftp and log all other connections:

    tftp dgram  udp  wait  nobody  /usr/etc/tcpd  in.tftpd -s /tftpboot

and edit appropriately /etc/hosts.allow to restrict access to in.tftpd to
only those addresses that really need it.

 o Check crontabs and at-jobs.  Make sure there are no delayed bombs which
will explode after you think you have got rid of all the nasty things left by
a intruder.

 o Check /etc/rc.boot /etc/rc.local  (SYSV: /etc/rc?.d/* ) and other files
ith the copies kept off-line).  Check all other files containing system
configuration (sendmail.cf, sendmail.fc, hosts.allow, at.allow, at.deny,
cron.allow, hosts, hosts.lpd, etc.)  In 'aliases' look for aliases expanding
to some unusual programs (uudecode is one but example).

 o Check your inetd.conf and /etc/services files to find if there are no
additional services set up by an intruder.

 o Copy all the log files you still have (pacct, wtmp, lastlog, sulog, syslog,
authlog, any additional logs you have set up earlier) to some safe place
(offline) so you may examine them later.  Otherwise, do not be surprised if
they disappear the next day when the cracker realises he forgot to remove one
of them.  Use your own imagination to find what other traces he could have
left in your system (What about /tmp/* files?  Check them BEFORE you reboot).

 o Make backup copy of /etc/passwd (best offline) then change all root
passwords (after verifying that 'su' and 'passwd' are not the trojan versions
left by an intruder).  It may sound like a horrible thing to do
(especially if you have something like 2000 users) but *do* lock them all by
putting '*' in the password field.  If the intruder has a copy of your
passwords file he may possibly sooner or later guess all the passwords
contained there (It is all the matter of proper dictionaries).  In fact he
could have inserted few passwords that he only knows for some users who for
example have not logged in for a long time.

        On the NIS servers check not only the real /etc/passwd /etc/groups etc
files but also those used for building NIS maps (if they are different).

 o Check if your anonymous ftp (and other services) are configured properly
(if you have any of course)  See the computer-security/anonymous-ftp FAQ.

 o If you want to make your life easier next time (or if you still cannot get
rid of an intruder) consider installing 'ident' daemon.  Together with tcpd on
a set of hosts it can be used to find what accounts the intruder is using.

 o Make sure the only 'secure' terminal is console (if at all).  This way you
prevent root logins just from the net.  Maybe it is not a big deal as if
somebody knows the root password he may already know other peoples' passwords
too, but maybe not?

 o And remember...  There are so many ways that somebody could have modified
your system, that you really have to have your eyes and ears wide open for a
loooooong long time.  Above, are the pointers just to the most obvious things
to check.


10.  Mail all the sites that you were able to find out that the intruder was
going through and warn them.  Also, CC: cert@cert.org.  Check all the sites in
your near-by, ie. in your domain/institution/whatever.  It's usually trivial
for a hacker to get to another system by a simple 'rlogin' if the two systems
have a common subset of users (and using .rhosts to make the access easier).


11.  A preventive from stopping many intruders from even trying your network
is to install a firewall.

        Side-effects: Firewalls may be expensive; filtering may slow down the
network. Consider blocking nfs (port 2049/udp) and portmap(111/udp) on your
router. The authentication and access controls of these protocols is often
minimal.  Suggestion: Block all udp ports except DNS and NTP ports. Kill all
source routing packets.  Kill all ip-forwarding packets.


Acknowledgements

Thanks to the following people for adding and shaping this FAQ:

Tomasz Surmacz <tsurmacz@asic.ict.pwr.wroc.pl>
Wes Morgan (morgan@engr.uky.edu)
Peter Van Epp <vanepp@sfu.ca>
Richard Jones <electron@suburbia.apana.org.au>
Wieste Venema <wietse@wzv.win.tue.nl>
Adrian Rodriguez <adrian@caip.rutgers.edu>


Copyright

This paper is Copyright (c) 1994
 by Christopher Klaus of Internet Security Systems, Inc.

        Permission is hereby granted to give away free copies.  You may
distribute, transfer, or spread this paper.  You may not pretend that you
wrote it.  This copyright notice must be maintained in any copy made.


Disclaimer

        The information within this paper may change without notice. Use of
this information constitutes acceptance for use in an AS IS condition.
There are NO warranties with regard to this information.  In no event shall
the author be liable for any damages whatsoever arising out of or in
connection with the use or spread of this information.  Any use of this
information is at the user's own risk.



Address of Author

        Please send suggestions, updates, and comments to:

        Christopher Klaus <cklaus@shadow.net>
        of Internet Security Systems, Inc. <iss@shadow.net>



--
Christopher William Klaus  <cklaus@shadow.net>  <iss@shadow.net>
Internet Security Systems, Inc.
2209 Summit Place Drive,
Atlanta,GA 30350-2430. (404)998-5871.



TUCoPS is optimized to look best in Firefox® on a widescreen monitor (1440x900 or better).
Site design & layout copyright © 1986-2014 AOH