Visit our newest sister site!
Hundreds of free aircraft flight manuals
Civilian • Historical • Military • Declassified • FREE!


TUCoPS :: Radio :: ic761_1.txt

Icom IC-761 mods




IC761.1

          IC-761 ACTIVATE TUNER WHEN IN GENERAL COVERAGE MODE

Remove  the  top cover of the IC-761 and locate  the tuner band switch unit
PC Board  which is the 2nd small PC board located  behind the antenna tuner 
preset unit.   On the board, locate J 7 and at that location, you will note
a three (3) pin  molex plug with a black,  brown, and red wire connected to
it.   Either  unplug, remove, or clip the center brown wire coming from the 
plug.   Carefully  unplugging the wire and placing  heat shrink tubing over 
the end works very well.  This enables the tuner to be activated on GENERAL
as well as the ham bands.
                        RELAYED  BY...N0KGX...GENE


TUCoPS is optimized to look best in Firefox® on a widescreen monitor (1440x900 or better).
Site design & layout copyright © 1986-2014 AOH