Visit our newest sister site!
Hundreds of free aircraft flight manuals
Civilian • Historical • Military • Declassified • FREE!

TUCoPS :: Radio :: ft747gx.txt

Yaesu FT-747GX general coverage mod


1.)  Remove top cover.

2.)  On backside of display unit there is a brown jumper wire near the large
     ribbon cable.

3.)  Cut this jumper.

4.)  Turn radio on and set display for 12.345.6 then turn radio off then on.

5.)  This enables the general coverage mode and a GEN display will come on
     and stay on at the top of the LCD display.

6.)  Reassemble the unit.  It will now transmit everywhere it receives,
     however Yaesu recommends that it only transmit from 1.8 - 30 MHz.

             RELAYED  BY...N0KGX...GENE


TUCoPS is optimized to look best in Firefox® on a widescreen monitor (1440x900 or better).
Site design & layout copyright © 1986-2015 AOH