Visit our newest sister site!
Hundreds of free aircraft flight manuals
Civilian • Historical • Military • Declassified • FREE!


TUCoPS :: Radio :: ft411.txt

Modification for Yaesu FT-411




FT411

Subject: FT-411 OUT OF BAND MODIFICATIONS
Date: 08 Feb 89

 1) Open the front cover
 2) Locate the C.P.U. unit (it is located on the front cover ).
 3) Locate Jumpers 1,2,3 and 4 , These are the band setting Jumpers
 4) Jumpers No 1,2 and 4 should be disconnected ,and Jumper No 3 should
    be connected.
 5) Close the radio .
 6) Apply power to the radio and turn it on.
    The display will initialize with memory No 1 flashing and the
    frequency display will show 1.000
 7) Now , adjust the display to the desired lowest receive frequency
    When done ,press VFO.
    The memory CH will now show 2 flashing .
 8) Adjust the display to the desired highest receive frequency
    When done press VFO .
    The memory CH will now show 3 flashing .
 9) Adjust the display to the desired lowest transmit frequency
    When done ,press VFO.
    The memory CH will now show 4 flashing .
10) Now , adjust the display to the desired highest transmit frequency
    When done ,press VFO.
11) The rig is now set for your programed band on transmit and receive.
CONTINUED IN FILE FT411.4

 


TUCoPS is optimized to look best in Firefox® on a widescreen monitor (1440x900 or better).
Site design & layout copyright © 1986-2014 AOH