AOH :: MCELWAIN.TXT|
Gravity neutralizing spacecraft / zero-gravity chamber (by well known NetKook Bob McElwaine)
The ZERO/REDUCED-Gravity Chamber described below has obvious potential
applications for Chemistry, Biology, Biophysics, Biochemistry, Medical
Research, etc., allowing experiments which now can be done ONLY on the Space
Shuttle, AT GREAT EXPENSE!
or ZERO/REDUCED-Gravity Chamber
NASA should build an experimental spacecraft based on
U.S. Patent #3,626,605 [at least $3.00 per complete copy from
U.S. Patent Office, 2021 Jefferson Davis Hwy., Arlington, VA
22202; correct 7-digit patent number required. Or try getting
it via your local public or university library's inter-library
loan dept..], titled "METHOD AND APPARATUS FOR GENERATING A
SECONDARY GRAVITATIONAL FORCE FIELD", awarded to Inventor
Henry W. Wallace on Dec. 14, 1971.
In the patent, Figs. 7A and 7B are basically side views
of a gravity-NEUTRALIZING FLYING SAUCER, or, if anchored to
the ground, a ZERO-GRAVITY CHAMBER [which could have MANY
possible GROUND-level applications for science, medicine,
manufacturing, etc.]. Each oval diagram shows a motor
spinning a central disc at a very high speed, about 28,000
RPM, and also rotating two other discs sandwiched around the
first disc, via gears, at a much slower speed, perhaps 2,800
RPM, in the opposite direction. The two outer discs have
extensions [counter-balanced via off-center axis] that, as
they rotate, alternately make contact with two wide
extensions from opposite walls of the spacecraft. The
central disc should have shallow spiral-shaped grooves on
both sides for air-bearings, to allow the needed very close
contact with the two outer discs.
I should clarify that each of the two outer discs has
ONLY ONE [counter-balanced] extension, each one pointed
opposite (180 degrees) the extension of the other disc.
VERY CLOSE CONTACT must be made as the disc extensions
slide past the wall extensions in order to conduct the
"Kinemassic" Energy (term coined by the Inventor) from the
discs to the walls in an ALTERNATING CIRCULATION.
The most important factor making it work is that the
discs, extensions, and outer walls of the spacecraft MUST be
made of any material(s) in which a very large majority of the
atoms are of isotopes having "half integral atomic spin",
such as copper (3/2). All other parts, etc., should have a
minority of such atoms. [See the appropriate column of the
table of isotopes in the latest edition of "The Handbook of
Chemistry and Physics."]
Experimenters should use one motor to spin the center
disc, and a 2ND SEPARATE motor to rotate the two outer discs,
so their relative speeds can be varied to establish the
needed conditions for PROPULSION of the spacecraft via
"NEGATIVE WEIGHT" (with the spacecraft's "Kinemassic" field
PUSHING AGAINST the earth's gravitational field, etc.).
If we have to put up a space station, establish Moon
bases, go to Mars, rendezvous with comets, etc., WHY DO IT
THE HARD WAY?!
Your favorite university or research company could make
a big name for itself by making a small model of this work.
UN-altered REPRODUCTION and DISSEMINATION of this
IMPORTANT Information is ENCOURAGED.
Robert E. McElwaine
B.S., Physics and Astronomy, UW-EC
The entire AOH site is optimized to look best in Firefox® 3 on a widescreen monitor (1440x900 or better).
Site design & layout copyright © 1986- AOH
We do not send spam. If you have received spam bearing an artofhacking.com email address, please forward it with full headers to firstname.lastname@example.org.